8. FAQ

• 8.1. No device found / Can’t open device
  • 8.1.1. Connect via USB
  • 8.1.2. Connect via ETHERNET
    • 8.1.2.1. If the 8SMC4-USB-Eth adapter is not found on the local network
    • 8.1.2.2. The controller serial number is not displayed on the “Common” tab
• 8.2. Unable to rotate the motor by the controller
  • 8.2.1. Controller has Alarm state
  • 8.2.2. Motor vibrates without rotation
  • 8.2.3. Mechanical jamming
  • 8.2.4. The motor does not react on move commands
• 8.3. When using the libximc library and Linux with kernel version less than 3.16, there are possible hanging of the operating system
• 8.4. Short-term controller loss
• 8.5. probe_flag - what is it?
• 8.6. Virtual controller as in XILab Software
• 8.7. Python CRC algorithm
• 8.8. Where can I find the programming manual for the 8smc4 controller?
• 8.9. How do I implement an emergency stop button?
• 8.10. How to get a xilab window that has disappeared off the screen?
• 8.11. How to check if the connection to 8SMC4-USB is established and still active during my session using the libximc library?